During titration the erlenmeyer flask is washed with?

Last Update: April 20, 2022

This is a question our experts keep getting from time to time. Now, we have got the complete detailed explanation and answer for everyone, who is interested!

Asked by: Ms. Trudie Pouros MD
Score: 4.6/5 (63 votes)

During the titration of an acid with a base, the sides of the Erlenmeyer flask are washed with distilled water.

What is used to wash the sides of a flask during a titration?

When doing titrations with aqueous solutions, only distilled water is used to rinse the conical flask so not to leave any residual chemicals in the...

How do you clean a titration flask?

Wash the flask and rinse it with solvent (probably distilled water) before using the pipette to add another aliquot of solution to the flask, and another drop of indicator if required. You may also need to refill the burette (buret) to the 0.00 mL mark if you have used more than half the volume of the burette (buret).

What is a Erlenmeyer flask used for in titration?

Marks on the flask or beaker are used to measure the precise amount of liquid. The Erlenmeyer flask offers a slight advantage in accuracy due to its tapered sides. The size of the beaker or flask should be chosen to allow for more liquid to be added during the titration process.

Why the erlenmeyer flasks are not rinsed with acid before the titration?

Water in the glass of the buret can cause variations in the concentration of the base being used, reason why we rinse it with the base, so we have a good precision titration. The erlenmeyer can be rinsed only with distilled water, since the volume of acid solution used for the calculation is constant.

[2] Procedures of Titrations

26 related questions found

Why titration flask should not be rinsed?

Consequently, if you don't rinse your burette with titrant and there really is some water remaining inside, the titrant you dispense will be more dilute than it should be.

Is it important to make sure that the Erlenmeyer flask is completely dry before adding the acid?

Since you are concerned with the number of moles in the volume of analyte dispensed from the pipet, the flask does not need to be completely dry before adding the analyte. ... Add titrant from the buret to the flask while stirring magnetically or swirling the flask with your hand.

Why must you swirl flask during titration?

It's important to ensure that the titrant is evenly combined with the titrand (analyte solution) and to avoid the formation of 2 separate layers, that wouldn't react with each other and would result in an erroneous titration.

Why is an Erlenmeyer flask not accurate?

Beakers and Erlenmeyer flasks should not be used to measure volume unless you need only a very crude estimate because their accuracy for volume measurements is so poor. They can hold a much larger volume than any of the other types of glassware, however, which makes them useful for mixing solutions.

Why use a flask over a beaker?

Flasks are normally the site of chemical reactions, for the reaction can take place in the large vessel and have low risk of spilling due to the long, narrow neck of the flask. Furthermore, flasks have the ability to be capped or corked, therefore solutions can be held for long periods of time without risk of spilling.

Why is the first titration not used?

Titrations are carried out quickly the first time to get a rough idea of the approximate volume that is needed to reach the end point. This value is too big since it is unlikely to have been stopped exactly at the endpoint. This reading is the "rough titre" and is not used to calculate the average.

What should the volumetric flask be rinsed with?

solutions Flasks should be rinsed with DI water only. Pipette and burette should be rinsed 3 times with DI water, then 3 times with the solution they will measure and transfer.

Why must a burette be washed prior to titration?

The titration is an analytical method, which allows to estimate the concentration of the given solution. Thus, you have to rinse the burette with a solution which must be filled in it, because distilled water change the concentration of the initial solution.

Why do you rinse the inside of the flask with pure water before adding the final few drops of titrant?

Why do you rinse the inside of the flask with pure water before adding the final few drops of titrant? ... If the burette is not completely dry by the time you use it, the remaining traces of water on the inside will make your titrant more dilute and thereby change its concentration.

Why do you rinse the conical flask with the water instead of the solution going to be titrated?

Once you've got your acid of unknown concentration in the conical flask, it's time to set up the burette with your alkali of known concentration. ... As with the pipette, the burette should be rinsed with distilled water followed by the solution it is to be filled with to avoid contamination issues.

What is the most accurate way to read in a titration?

Calibrate Your Electrode Regularly

A pH electrode should be calibrated each day (at least once) it is used to get the most accurate reading. A two-point method is typically sufficient, as long as the appropriate buffers are used.

What is the difference between an Erlenmeyer flask and a Buchner flask?

A Büchner, or sidearm flask is essentially an Erlenmeyer flask (see above) with an additional small tube extending from the side of the neck. The bottom is conical in shape, with a short neck from which the small tube extrudes. The entire flask is made of thick glass.

What are the benefits of using an Erlenmeyer flask instead of a beaker?

Erlenmeyer flask

It's probably the second most-used piece of lab glassware. It's used for all the reasons a beaker is, but has the advantage of a long, narrow neck. The extended neck makes it possible to swirl a solution vigorously without spilling, and it makes the vessel fairly easy to pour.

Is an Erlenmeyer flask precise?

Erlenmeyer flasks and beakers are used for mixing, transporting, reacting, and filtration but not for accurate measurements. The volumes stamped on the sides are approximate and accurate to within about 5%.

What is end point in titration?

end point: the point during a titration when an indicator shows that the amount of reactant necessary for a complete reaction has been added to a solution.

Why do you need to swirl the flask after each drop of NaOH standard solution?

It important to swirl the solution each time before you add additional NaOH to ensure that it is entirely mixed.

How did the Erlenmeyer flask get its name?

The Erlenmeyer flask is named for Emil Erlenmeyer (1825–1909), a German organic chemist who designed the flask in 1861. The flask is often used for stirring or heating solutions and is purposefully designed to be useful for those tasks.

Why should you tap the Erlenmeyer flask before filling completely?

Terms in this set (6) To ensure that all of the solution added from the burette goes into the conical flask and isnt used to fill the space below the tap. It reduces the chance of solution splashing out whilst swirling.

Is it necessary to dry the volumetric flask?

In order to avoid a volume disorder, the volumetric glassware should not be dried by heating. Instead, wet glassware should be rinsed with the liquid to be measured just before use. ... When an aqueous solution is prepared in a volumetric flask, the solution is eventually diluted with water.

Why is dilution important in titration?

Adding Water to the Titrant

When you add water to the titrant, you dilute a solution of known molarity. ... Also, because you dilute the titrant, it will take a larger amount of titrant to cause a change in the analyte. Therefore, the entire titration process will take longer.